|Parts Production Line
01 Solar Water Heater Tank 160T Press Punch Machine Structural Features:
Host structure for the three beam four-post:
With a jog, semi-automatic, scheduled process, the process of constant pressure mode.
With independent electrical control system, centralized button operation.
The use of controlled electrical relay.
The main oil used cartridge valve.
Pump inlet to increase the oil filter.
02 Main Technical Parameters:
Nominal force: 1600KN
Return force: 320KN
Maximum Punch: 400KN
Maximum return force: 260KN
Maximum working pressure liquid: 25MPa
Slide stroke: 700mm
Maximum Ejector stroke: 200mm
Maximum distance from the work surface slider: 1000mm
Under fast: 120mm/s
Return trip: 100mm/s
Effective area of work surface (front left and right *): 1000MM*800MM
Motor Power: 11KW
03 The Main Process Action:
The machine has a "jog, semi-automatic" two way process
04 Semi-automatic process by:
Rapid slide down - slow down the pressure slider - slider holding pressure - relief - the slider return - top of the cylinder to move the top - the top of the stop (manual take Pei) - return the cylinder to move the top - manual feed - hands button to enter the next cycle.
05 The Main Components:
Three beams HT250 castings, columns, piston rod 45 #, IF surface hardening, forging cylinder 45 #
06 Machine Safety Measures:
The machine's security and technical conditions in line with China's national mandatory standards GB/T5226.1-2008 and relevant national standards. When the safety standards and technical specifications of the other standards are in conflict, safety has priority.
The hydraulic system with overload protection to prevent high pressure and other factors of insecurity.
The equipment noise standards in line with JB9967-1999.
A reliable electrical system grounding and motor overload, short circuit protection.
Machine operation and emergency stop button with both hands.
This machine is used in oil machine oil (or hydraulic oil), non-toxic substances. Recyclable, no pollution to the environment.