|Model NO.||EN source|
|Production Scope||Parts Production Line|
|Cylinder Specification||Inner Tank/Outer Tank|
|After-sales Service||3-Year Warranty|
01 Product Introduct:
This machine is the check leakage equipment of inner tank electric water heater. The frame of this equipment is welded by the square tube which size is 50*80*5mm. The water pool is made of 12mm of toughened glass adhesive together. Feeding material should manual. With the working of reduce speed electric machine, it can take the gear working up and down. The whole check process is finished only by using machine one time.
02 Product Features:
Water heater leakage of the water tank machine is placed in the tank to test platform, completes the initial preparation, all accurate after, began to fill detection, through the set certain promptly after the pressure, the tank of water tank of gas tightness test whether a flat? If have a bubble? To perceive accurately specific a flat position. According to the test results workers do the further processing; Or into the next working procedure. In this cycle.
03 Technical Parameters:
Model specification: L1500/L2000/L2500/L3000mm
Tank diameter: 310—600mm
Workpiece thickness: ≤2.5mm
Rated voltage: 220VAC 50HZ
Rated power: 1.5KVA
Compressed air: 0.45Mpa
Cylinder under pressure range: 0 ~ 800mm
Drive cylinder range: 0 ~ 700mm
Using Taiwan linear guide and the cylinder
Electric parts ,CHNT
Maintenance time: one year
Pneumatic components is AIRTAC.
The device has a self-plug, move, under the pressure back to the origin. Unloading plug function, duplex and single-station selection. Fast , efficient, less labor and so on.
04 Product Photo: